Avaya Vantage K175 Installing And Administering page 170

Supported configuration parameters
Parameter
DSCPSIG
DSCPVID
Call option parameters
Parameter
ENABLE_REDIAL
CCBTNSTAT
September 2018
Type Default Is set to
value default
on reset
Numeric 34 Yes
Numeric 34 Yes
Type Default Is set to
value default
on reset
Numeric 1 Yes
Numeric 1 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• The TIA LLDP MED Network policy TLV. The
precedence is 4.
Specifies the decimal presentation of DSCP for
signaling frames generated by the device.
You can assign a value between 0 and 63.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file. The precedence is 3.
• The TIA LLDP MED Network policy TLV. The
precedence is 4.
Specifies the decimal presentation of DSCP for
video frames generated by the device.
You can assign a value between 0 and 63.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file. The precedence is 3.
• The TIA LLDP MED Network policy TLV. The
precedence is 4.
Description
Specifies whether the Redial button is available to
users.
Assign one of the following values:
• 0: The Redial button is unavailable.
• 1: The Redial button is available.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether you can enable or disable the
conferencing, call transfer, call hold, and mute
features separately using the corresponding
parameters.
Assign one of the following values:
™
• 0: Avaya Vantage Basic uses the values of
parameters related to these features. You can
™
Table continues...
170