Avaya Vantage K175 Installing And Administering page 166

Supported configuration parameters
Parameter
Dialing rule parameters
Parameter
ENHDIALSTAT
PHNCC
PHNIC
PHNLD
PHNDPLENGTH
PHNLDLENGTH
PHNOL
September 2018
Type Default Is set to
value default
on reset
Type Default value Is set to
Numeric 1
String Null string
String Null string
String Null string
String Null string
String Null string
String Null string
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• 1: Data collection is enabled.
For provisioning, use the SET command in the
46xxsettings.txt file.
Description
default on
reset
Yes Specifies whether the dialing rules are
used during certain dialing activities.
Assign one of the following values:
• 0: To disable the dialing algorithm.
• 1: To enable the dialing algorithm for all
outgoing calls.
Yes Specifies the country code. Valid values
are from 1 to 999.
Yes Specifies the access code that you dial to
make international calls.
The value can be of 0 to 4 characters in
length. The allowed characters are 0-9, *,
and #.
Yes Specifies the access code that you dial to
make long distance calls.
Valid values are from 0 to 9, and null string
(""). If long distance access code is not
required, set the value to ""
Yes Specifies the length of internal extension
numbers. The value must match the
extension length set on the call server.
The valid range is from 3 to 13.
Yes Specifies the length of national phone
numbers of the country that is considered
in the dial plan.
Valid values are from 5 to 15.
Yes Specifies the outside line access code,
which is the number you press to access
an external line.
Table continues...
™
166