Avaya Vantage K175 Installing And Administering page 122

Supported configuration parameters
Parameter
TLSPORT
SIP_CONTROLLE
R_LIST
September 2018
Type Default Is set to
value default
on reset
Numeric 443 Yes
String Null Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
™
Avaya Vantage uses this parameter only if
FILE_SERVER_URL is not set.
This parameter is supported in all modes.
For provisioning, use:
• A name=value pair in a DHCPACK message.
• DHCP option 43.
• The SET command in the 46xxsettings.txt
file.
Specifies the destination TCP port for HTTPS
requests. The range is from 0 to 65535.
™
Avaya Vantage uses this parameter only if
FILE_SERVER_URL is not set.
®
To use Avaya Aura Utility Services as an HTTPS
server, you must set the TCP port to 411 instead of
the default 443.
This parameter is supported in all modes.
For provisioning, use:
• A name=value pair in a DHCPACK message.
• DHCP option 43.
• The SET command in the 46xxsettings.txt
file.
Specifies a list of IP addresses of SIP proxy or
registrar servers.
The value of the parameter is a list of SIP proxy
server addresses separated by commas without
any spaces between entries. Each entry in the list
has the following format:
host[:port][;transport=xxx], where:
• host is an IP address in the dotted decimal or
DNS format.
• port is the optional port number. If you do not
specify a port number, Avaya Vantage
following default values:
- 5060 for TCP
- 5061 for TLS
™
™
uses the
Table continues...
122