Avaya Vantage K175 Installing And Administering page 146

Supported configuration parameters
Parameter
PKCS12PASSWO
RD
PKCS12_PASSWD
_RETRY
CERT_INSTALL_A
PPLICATION_LIST
ID_CERT_APPLIC
ATION_LIST
September 2018
Type Default Is set to
value default
on reset
String Null Yes
String 3 Yes
String all Yes
String all Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies a PKCS #12 file password.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies the number of failed attempts to enter the
password for the PKCS#12 file. If the user fails to
enter the correct password, Avaya Vantage
install the PKCS#12 file.
The range is from 0 to 100, where 0 means that the
user cannot retry to enter the password.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies which applications can install trusted and
identity certificates on Avaya Vantage
of the following values:
• all: All applications can install certificates.
• Null string: No application can install certificates.
• A list of comma-separated application package
names: Only the specified applications can install
certificates. List entries are separated by
commas. For example: SET
CERT_INSTALL_APPLICATION_LIST
flare.avaya.com,vantage.basic.avaya.c
om
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies which applications can access the identity
certificate stored on Avaya Vantage
the following values:
• all: All applications can access certificates.
• Null string: No application can access certificates.
The exception is an active phone application
™
™
will not
™
. Assign one
™
. Assign one of
Table continues...
146