Warning Lamp - Mercedes-Benz Citan 2015 Operating Instructions Manual

Warning and indicator lamps in the instrument cluster
134
Display messages
OIL PRESSURE
FAULT
STEERING
FAULT
Warning and indicator lamps in the
instrument cluster
STOP warning lamp and workshop
indicator lamp
Certain warning and indicator lamps light up
concurrently with the ¤ warning lamp or the
¯ indicator lamp in the instrument cluster.
When the ¤ warning lamp is lit, stop the
vehicle for your own safety, paying atten-
tion to road and traffic conditions. Switch
off the engine and do not re-start it. Visit a
qualified specialist workshop. Also observe the
warning messages in the multifunction display.
When the ¯ indicator lamp is lit, visit a quali-
fied specialist workshop as soon as possible.
There is otherwise a risk of damage to your vehi-
cle. Until then, exercise extreme caution
when driving. Also observe the fault messages in
the multifunction display.
Possible causes/consequences and M Solutions
G
WARNING
There is insufficient oil in the engine. There is a danger of engine
damage.
X
Stop the vehicle immediately, paying attention to road and traffic
conditions, and switch off the engine.
X
Check the oil level again with the oil dipstick (
the on-board computer.
X
If necessary, top up the engine oil (
X
If the engine oil level is OK: have the fault rectified immediately at a
qualified specialist workshop.
G
WARNING
There is a serious malfunction in the power steering system.
X
Stop the vehicle immediately, paying attention to road and traffic
conditions, and switch off the engine.
X
Consult a qualified specialist workshop immediately.
Y
page 160) or with
Y
page 162).