Information Messages - Mercedes-Benz Citan 2015 Operating Instructions Manual

Display messages
128
Examples of information messages
Display messages
NO MESSAGE
AVAILABLE
BATTERY
ECONOMY
CHECK
DEACTIVATED
CHECK
ACTIVATED
ENGINE
ENGINE
OIL LEVEL
OK
OIL LEVEL
- - - - -
SPEED LIMITER
- - - MPH
SPEED MEMORY
- - - MPH
Cruise control
- - - MPH
CHECK TYRE PRESSURES
Possible causes/consequences and M Solutions
There are no messages stored in the on-board computer.
To conserve the battery charge, the vehicle accessories are switched
off.
The automatic headlamp feature is deactivated.
The automatic headlamp feature is activated.
If there is undervoltage and/or the engine is switched off (ECO start/
stop function).
X
Start the engine.
The engine oil level has not fallen below the minimum level.
The message appears if the
played in the multifunction display and the button for operating the on-
board computer is pressed when starting the engine.
While depressing the accelerator pedal beyond the pressure point
(kickdown), SPEEDTRONIC cannot be activated.
When you deactivate cruise control or SPEEDTRONIC, the currently
stored value is shown in the multifunction display.
X
Briefly press the button for operating the on-board computer
repeatedly until the standard display is shown (
A condition for activating cruise control has not been met.
You have tried to store a speed below 30 km/h, for example.
X
If conditions permit, drive faster than 30 km/h and store the speed.
X
Check the activation conditions for cruise control (
The tyre pressure is too low in at least one of the tyres, or the tyre
pressure difference between the wheels is too great.
The h warning lamp also lights up.
X
Check the tyre pressures at the next opportunity.
X
If necessary, correct the tyre pressure.
X
Then restart the wireless tyre pressure monitor (
OIL LEVEL CORRECT
message is dis-
Y
page 125).
Y
page 114).
Y
page 191)