Mercedes-Benz Citan 2015 Operating Instructions Manual page 174

Where will I find...?
172
Observe the legal requirements in the rele-
vant country.
Tyre-changing tool kit
The tyre-changing tool kit is located on the right-
hand side of the load compartment.
i The vehicles are equipped with the tools
needed to change a wheel when they leave
the factory, e.g. a jack or wheel wrench. Coun-
try-specific variations are possible.
The tyre-changing tool kit contains:
wheel wrench
R
towing eye
R
jack, depending on the vehicle model
R
Removing the tyre-changing tool kit
Example: vehicles with side panelling, version A
Example: vehicles with side panelling, version B
Example: tyre-changing tool kit, version A
Example: tyre-changing tool kit, vehicles without
side panelling
X
Open the tailgate/rear door.
X
Vehicles without side panelling: remove
tyre-changing tool kit =.
X
Vehicles with side panelling: using han-
dle ;, pull cover : either forwards or down-
wards, depending on the vehicle model, and
then remove.
X
Unscrew handwheel with threaded rod ?.
X
Remove tyre-changing tool kit :.
Stowing the tyre-changing tool kit, vehi-
cles with side panelling:
X
Replace tyre-changing tool kit =. Make sure
that implement B is in fixture A.
X
Screw on handwheel with threaded rod ?.
X
Insert cover : with tabs into the side panel-
ling and fold it back or up, depending on the
vehicle model, until the cover engages.