View The Licensed Features; Set Informational Parameters - Emerson Micro Motion 5700 Configuration And Use Manual

Quick start
2.6

View the licensed features

Display
ProLink III
Web browser
Overview
The transmitter license controls the features (applications) that are enabled on the
transmitter. You can view the licensed features to ensure that the transmitter was ordered
with the required features.
Licensed features have been purchased and are available for permanent use. The options
model code represents the licensed features.
A trial license allows you to explore features before purchasing. The trial license enables
the specified features for a limited number of days. This number is displayed for reference.
At the end of this period, the feature will no longer be available.
To purchase additional features or request a trial license, contact customer service. To
enable the additional features or request a trial license, you must install the new license.
2.7

Set informational parameters

Display
ProLink III
Web browser
Overview
You can set several parameters that identify or describe the transmitter and sensor. These
parameters are not used in processing and are not required.
Procedure
1.
8
Menu > About > Licenses > Licensed Features
Device Tools > Device Information > Licensed Features
Configuration > Device Information > Licensed Features
Menu > Configuration > Device Information
Device Tools > Configuration > Informational Parameters
Configuration > Time/Date/Tag
Set informational parameters for the transmitter.
a. Set Transmitter Serial Number to the serial number of your transmitter.
The transmitter serial number is provided on the metal tag that is attached to the
transmitter housing.
b. Set Descriptor to any desired description of this transmitter or measurement
point.
c. Set Message to any desired message.
d. Verify that Model Code (Base) is set to the base model code of the transmitter.
Micro Motion Model 5700 with Ethernet Transmitters