Setting The Cutting Length - DURKOPP ADLER 581 Operating Instructions Manual

54
5.2.4

Setting the cutting length

On the display, the field (1) indicates the cutting length. You can
set the cutting length.
Fig. 39: Setting the cutting length in sequential mode
(1) - Cutting length
To set the cutting length:
1. Use the button
2. Press the
 The cursor flashes.
3. Use the buttons
4. Confirm with the
to navigate to the field Cutting length (1).
button.
or to set the desired value.
button.
Operating Instructions 581 - 01.0 - 05/2016
Programming
①