Changing The Blade - DURKOPP ADLER 581 Operating Instructions Manual

Operation
Operating Instructions 581 - 01.0 - 05/2016

4.12 Changing the blade

Fig. 28: Changing the blade
①
②
(1) - Screws
(2) - Old blade
To change the blade:
1. Loosen the screws (1) and remove the bobbin case retainer (3).
2. Remove the old blade (2).
3. Insert the new blade (4) to the base of the groove and bend
in the direction of the arrow.
4. Re-tighten the screws (1).
5. Tighten the bobbin case retainer using the screw (1).
Important
The blade may not project outside the bobbin case retainer!
(3) - Bobbin case retainer
(4) - New blade
④
③
41