84
5.9.6
Threading position
The subitem Threading position is used to set how the
machine is set up.
Parameters in the Threading position subitem
Icon
Entry
Threading
pos.
To set the threading position:
1.
Select ( p. 69) Machine config in service mode.
2.
Press the
3.
Press the
position is highlighted on the display.
Fig. 53: Threading position
4.
Press the
Standard appears on the display.
Meaning
• Standard =
Normal insertion
• Longitudinal =
Lateral insertion
button.
button as often as required until Threading
button.
Operating Instructions 581 - 01.0 - 05/2016
Programming
Possible
Preset value
value range