Multiflex (581-321 And 581-341 Only) - DURKOPP ADLER 581 Operating Instructions Manual

88
5.9.9

Multiflex (581-321 and 581-341 only)

The subitem Multiflex is used to set the integrated cutting
system.
Parameters in the Multiflex subitem
Icon Entry
Multiflex
Mono mode
• X-correction left buttonhole
• X-correction right buttonhole
• Y-correction for both buttonholes
Multi mode
• X-correction left buttonhole
• X-correction right buttonhole
• Y-correction for both buttonholes
• Block length
• Blade number for left blade
• Blade number for right blade
To set the cutting system:
1. Select ( p. 69) Machine config in service mode.
2. Press the
3. Press the
is highlighted on the display.
Meaning
• Mono
• Multi
button.
button as often as required until Multiflex
Operating Instructions 581 - 01.0 - 05/2016
Programming
Possible
Preset value
value range