DURKOPP ADLER 581 Operating Instructions Manual page 109

Programming
Operating Instructions 581 - 01.0 - 05/2016
4. Press the
 The following options are available:
• Step by step
• Start ref.
• St.cont.operat
• Looper adjust.
Step by step
In the subitem Step by step sewing is stopped at various points
during the sewing process. The stop points make it easier to check
and set the machine.
To start the test program:
1. Press the
 The set value has the following meaning:
• 0 = Normal sewing process, the test program is switched off.
• 1 = After switching the valves for the needle thread
catcher, the sewing process is stopped.
• 2 = After switching the valves for the relevant thread cutting
system, the sewing process is stopped.
• 3 = After switching each valve, the sewing process is
stopped.
You can quit the test program by pressing
button.
button.
and then .
107