Inserting/Changing The Needle - DURKOPP ADLER 581 Operating Instructions Manual

Operation
Operating Instructions 581 - 01.0 - 05/2016
Deactivating threading mode
To deactivate the threading mode:
1. Press the button (1) again. The button must disengage.
 After a short pause, the machine is ready to sew again.
The sewing process is continued from the point where
threading mode was activated.
4.4

Inserting/changing the needle

WARNING
Risk of injury from sharp parts!
Punctures possible.
Only change the needle when the machine is
switched off.
Fig. 7: Inserting/changing the needle (1)
①
(1) - Screw
To insert or change the needle:
1. Loosen the screw (1).
2. Pull the needle (2) from the needle bar.
(2) - Needle
②
23