Cleaning - DURKOPP ADLER 581 Operating Instructions Manual

Maintenance
Operating Instructions 581 - 01.0 - 05/2016
6.1

Cleaning

WARNING
Risk of injury from flying particles!
Flying particles can enter the eyes, causing injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.
NOTICE
Property damage from soiling!
Lint and thread remnants can impair the operation of the
machine.
Clean the machine as described.
NOTICE
Property damage from solvent-based cleaners!
Solvent-based cleaners will damage paintwork.
Use only solvent-free substances for cleaning.
The machine must be cleaned of dust and thread remnants on a
daily basis. A clean machine provides protection from disturbances.
To clean the machine:
1. Clean the area of the looper, thread cutter, throat plate and
the sewing head of sewing dust, thread remnants and cutting
waste.
If a vacuum is available, it is recommended to vacuum the
sewing waste.
2. If required, empty the cutting waste from the suction container.
123