116
5.12 Menu item Data transfer
The menu item Data transfer allows you to save or load
buttonhole programs to or from a USB key.
In this menu item, the following subitems are available for selection:
• Import ( p. 116)
• Export ( p. 117)
5.12.1 Import
The menu item Import allows you to load buttonhole programs
from a USB key onto the machine.
To select the Import subitem:
1.
Select ( p. 69) Data transfer in service mode.
2.
Press the
The following appears on the display:
Fig. 70: Import (1)
3.
Press the
The data is imported.
If the buttonhole programs originate from a machine with a different
subclass or from a different item of sewing equipment, the follow-
ing information appears on the display:
button.
button.
Operating Instructions 581 - 01.0 - 05/2016
Programming