This user guide provides complete information for installing and operating a Unidrive SP from start to finish.
The information is in logical order, taking the reader from receiving the drive through to fine tuning the performance.
NOTE
There are specific safety warnings throughout this guide, located in the relevant sections. In addition, Chapter 1 Safety
Information contains general safety information. It is essential that the warnings are observed and the information
considered when working with or designing a system using the drive.
This guide should be read in-line with the relevant User Guide also, which contains additional information which may be
required whilst designing and commissioning a regen system.
This map of the user guide helps to find the right sections for the task you wish to complete:
1 Safety information
2 Introduction
3 Product information
4 System design
5 Mechanical Installation
6 Electrical installation
7 Getting started
8 Optimisation
9 Parameters
10 Technical data
11 Component sizing calculations
12 Diagnostics
How to use this guide
Familiarisation
Programming
Programming
System design
System design
and
and
commissioning
commissioning
Troubleshooting