Menu 22: Additional Menu 0 Set-Up - Emerson SP1201 Installation Manual

Safety Product
Introduction
Information information
9.18

Menu 22: Additional menu 0 set-up

Menu 22 contains parameters that are used to set up the source parameters for menu 0 in addition to those that are set up from within Menu 11.
22.01 to 22.07
22.10 to 22.11
Parameter 00.xy set-up
22.18
22.20 to 22.29
Drive mode Regen
Bit SP
Coding
Range Regen
Default Regen
Update rate Background read
These parameters define the parameters that reside in the programmable area in menu 0.
Table 9-19 Menu 22 default settings
Parameter Menu 0 parameter
Pr 22.01
Pr 22.02
Pr 22.03
Pr 22.04
Pr 22.05
Pr 22.06
Pr 22.07
Pr 22.10
Pr 22.11
Pr 22.18
Pr 22.20
Pr 22.21
Pr 22.22
Pr 22.23
Pr 22.24
Pr 22.25
Pr 22.26
Pr 22.27
Pr 22.28
Pr 22.29
It should be noted that if the parameter values saved in the drive EEPROM or on a SMARTCARD are all zero for menu 22 the drive will automatically
load defaults for this menu when the drive is powered up or the parameters are transferred from the SMARTCARD. This ensures that defaults are
used for this menu if the saved parameters are from a software version which did not include this menu.
182
System Mechanical
design installation
FI DE Txt VM DP ND
2
Pr 1.00 to Pr 21.51
See Table 9-19
Regen
Pr 031 Pr 11.33
Pr 0.32 Pr 11.32
Pr 0.33 Pr 0.00
Pr 0.34 Pr 11.30
Pr 0.35 Pr 11.24
Pr 0.36 Pr 11.25
Pr 0.37 Pr 11.23
Pr 0.40 Pr 0.00
Pr 0.41 Pr 5.18
Pr 0.48 Pr 11.31
Pr 0.50 Pr 11.29
Pr 0.51 Pr 0.00
Pr 0.52 Pr 0.00
Pr 0.53 Pr 0.00
Pr 0.54 Pr 0.00
Pr 0.55 Pr 0.00
Pr 0.56 Pr 0.00
Pr 0.57 Pr 0.00
Pr 0.58 Pr 0.00
Pr 0.59 Pr 0.00
www.controltechniques.com
Electrical Getting
Optimisation
installation started
RA NC NV PT US RW BU
1 1
Technical Component
Parameters
data
PS
1 1
Unidrive SP Regen Installation Guide
Diagnostics
sizing
Issue Number: 2