Scan Settings Error Messages - Ricoh IS300e Operating Instructions Manual

Scan settings error messages

Message
Cannot detect the scan size.
Check whether the original is
set, then select
size.
[Exit]
Possible Cause and Required Action
The original is not on the exposure glass, or it
is placed but the scan size cannot be automati-
cally detected.
the proper
• If the original is not there, place it on the ex-
posure glass.
• Because the scanner detects the scan size
when the ADF is opened and closed, make
sure you open the ADF to an angle of 30 de-
grees or more.
• Small size paper and some paper sizes may
not be detected automatically. For details,
see p.110 "The Original Sizes Available for
Auto Detection" .
Troubleshooting
11
173