Print Scan Operation Error Messages - Ricoh IS300e Operating Instructions Manual

Appendix
Exceeded max. scan pages. To
scan remaining pages as a new
job, press
then press the Start key.
[Exit]

Print Scan operation error messages

Printer
Check the printer.
[Exit]
The printer is current-
ly in use. Cannot print.
[Exit]
Selected printer is not
supported.
printer.
[Exit]
No response
device. Check the power
and cables.
[Exit]
Warming up... Check the
printer.
[Exit]
Add paper to the print-
er.
[Exit]
Add Toner Replace Toner
Bottle in the printer.
11
[Exit]
Cover
printer.
[Exit]
Paper Misfeed Check the
printer.
[Exit]
Functional
Check the printer.
[Exit]
176
Message
[Exit]
Message
is offline.
Check the
from the
Open Check the
Problems
Possible Cause and Required Action
• Continued scanning and reached the max-
imum scan limit (100 pages). Press [Exit].
The scanned original is sent. The specified
destination and scanning condition set-
tings remain the same even after you have
pressed [Exit]. Place the next original and
press the { { { { Start} } } } key.
Possible Cause and Required Action
• The printer you have selected for printing is currently
offline. Press the { { { { Online} } } } key on the printer to make it
online. Press [Exit] to start printing.
• The printer is currently in use. Press [Exit] to cancel the
print job (this discards the scan data), and try again lat-
er.
• The printer is not compatible with this machine. Select
other printer that is supported for use with this ma-
chine.
• The printer is not responding. Check if the power of
the printer is turned on, and the cables are connected
correctly.
• The printer is not ready to print, because it is still
warming up. Wait until the printer is ready.
• Take the necessary actions in accordance with the mes-
sage that is displayed. See the manual that comes with
the printer for information about adding paper, replac-
ing toner bottle, closing the cover of the printer, or
clearing misfeeds.
• The printer has functional problems other than those
mentioned above. Check to make sure that the printer
operates normally. See the manual that comes with the
printer.