Outline To Use Scan To Ftp - Ricoh IS300e Operating Instructions Manual

Outline to Use Scan to FTP

The following overview diagram shows the preparation steps for sending scan
files to folders on an FTP server. Note that the underlined steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 "Initial Scanner Setup" for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, See p.84 "Accessing the Scanner"
Configure [1.System Settings] on this ma-
Configure [General Settings] on the Web Status
Configure [2.SendScan Settings] and [4.Scan
Settings] on this machine or on the Web Status
Configure [Custom Title] settings on the Web
Status Monitor.
Configure [File Send], register [FTP Server]
and [File Name] on the Web Status Monitor
Recall the Settings on the Web Status Monitor
chine
Monitor
Monitor
Outline to Use Scan to FTP
See p.52 "System Settings"
See the Web Status Monitor Help.
See p.59 "Scanner Settings"
See the Web Status Monitor Help.
See p.94 "Information to register in
[FTP Server]".
See the Web Status Monitor Help for
details about [File Send] and [File Name].
See p.98 "Recalling the Settings" for
details.
3
37