Attaching The Control Panel Unit To The Scanner Unit - Ricoh IS300e Operating Instructions Manual

Ricoh image scanner operating instructions

Table of Contents

Attaching the Control Panel Unit to the

Scanner Unit

Note

❒ Use the tool that comes with this

machine when you tighten or loos-

en the screws.

A A A A

Insert the plug of the control pan-

el unit into the socket on the scan-

ner unit, as illustrated below.

Important

❒ While making sure that the plug

is facing in the correct direction,

inset the plug as far as it goes

into the socket. It may be a bit

tight to insert the plug into the

socket, so push the plug with a

strength that is enough for in-

serting it in place.

Note

❒ To avoid the plug being insert-

ed in the wrong direction, the

socket has a number of tiny

prongs inside of it. When you

insert the plug into the socket,

make sure that the socket is fac-

ing in the correct direction. In-

serting in the wrong direction

creates the risk of damage to the

plug and the socket.

❒ Be careful not to pinch the cable

when you attach the control

panel unit to the scanner unit.