To Restore Settings From A Backup File - Ricoh IS300e Operating Instructions Manual

Configuring the Scanner Settings
E E E E
Enter each of the items on the
screen.
❖ File Send Path
Enter the shared folder path for
storing the backup file. Enter
t h e p a t h i n t h e f o r m a t o f
"\\host name\folder name" or
"\\IP address\folder name".
Note
3
❒ The specified IP address is ef-
fective only for the computer
running Windows 2000/XP
or Windows NT as operating
system. An IP address cannot
be specified for a host run-
ning Windows 98/Me as op-
erating system.
❖ ❖ ❖ ❖ Login User Name
Enter a user name with shared
folder access, in the format of
"work group name\user name"
or "domain name\user name".
❖ ❖ ❖ ❖ Login Password
Enter the password for the user
name displayed in the [Login
User Name] box. Each password
character appears as "*".
Note
❒ If you are running Windows
98/Me and a shared folder
password is required, enter
it.
❖ ❖ ❖ ❖ [Test]
Click to check whether connec-
tion to the specified shared fold-
er is enabled wh en data is
entered in the [File Send Path],
[Login User Name], and [Login
Password] boxes.
❖ ❖ ❖ ❖ Backup File Name
Enter a file name for the backup
file. Enter a name using up to 20
characters.
100
F F F F
When everything is the way you
want, click [Backup].
Note
❒ Click [Cancel] to restore the
former settings on the screen.
After a backup file is created, the
message "
Backup has succeed-
" appears.
ed.
G G G G
Confirm that the backup file is
created in the folder you have
specified, by using the Windows
explorer.

To restore settings from a backup file

A A A A
Click [Configuration] on the main
menu.
The password input dialog box ap-
pears.
Note
❒ Once you set the password, the
password input dialog box will
not appear from the second
time. When the dialog doesn't
appear, proceed to
B B B B
You can change the password us-
ing [Configuration] → → → → [Basic Set-
tings] → → → → [Password].
Note
❒ The user name is fixed to "scan-
ner".
❒ The password is set to "pass-
word" as the factory default.
You can change the password
using [Configuration]  [Basic
Settings]  [Password].
C C C C
Click [OK].
The setup screen appears.
D D D D
Click [Basic Settings], and then
[Backup] in the sub-menu area.
D
.