Ricoh IS300e Operating Instructions Manual page 129

C According to the settings of
[Document:] and [Orientation:],
change the other setting of the
[Document] group.
Reference
For information about mak-
ing settings for the [Docu-
m e n t ] g r o u p , s e e p . 1 1 3
"Simplex Scanning", p.114
" D u p l ex S c a n n in g " a n d
TWAIN driver Help.
When you want to configure the
scanning area
When you do not configure the
scanning area, the area scanned is
the size specified in the [Size:] box.
A Click [Preview].
The original that was placed is
scanned and the [Preview] dialog
box appears. The scanning area
in the preview is displayed
within the broken lines.
B Configure the scanning area by
dragging a border or a corner.
When reconfiguring the area,
click and drag one corner of the
area towards or away from its
opposite corner.
Note
❒ Depending on the scanning
resolution, the area to be
scanned may be subject to re-
strictions. For more informa-
tion about the relationship
between the resolution and
t h e s c a n n i n g a r e a , s e e
TWAIN driver Help.
C Click [Close].
Note
❒ When an original placed in
the ADF is previewed, place
that original again.
D D D D
Click [Scan].
When there are additional origi-
nals to scan, place the original, and
then click [Continue]. When there
are no more originals, click [Com-
plete].
E E E E
Save the scan file in DeskTop-
Binder V2 Lite.
A On the [File] menu, click [Exit].
B Enter the file name, and then
click [OK].
The image is stored in DeskTop-
Binder V2 Lite, and DeskTop-
Binder Viewer closes.
- - Editing and printing scan files - -
With DeskTopBinder V2 Lite, it is
possible to edit and print scan files.
For more information about how to
edit and print, see DeskTopBinder V2
Lite Help.
Scanning Originals
121
5