Setting Originals; Sizes And Weights Of Recommended Originals - Ricoh IS300e Operating Instructions Manual

This chapter describes how to set an original to be scanned with this machine
It is possible to set an original on the exposure glass or the ADF. To scan several
pages successively, the ADF is convenient.
Sizes and Weights of recommended
Originals
Where original is
set
Exposure glass Up to A3(297mm×420mm)
Up to 11"×17"
❖ ❖ ❖ ❖ Standard size
ADF One
side
Both
sides
❖ ❖ ❖ ❖ Non-standard size
Note
❒ To scan an original which siza is A5 or smaller, or which weight is 52g/m
lighter from the ADF using a network TWAIN driver, set [Location] to "ADF
(thin paper)" on the application software you use the network TWAIN driver.
For details, see the network TWAIN driver help.
❒ When you perform a Send Scan (e-mail, Send File (SMB/FTP) or Delivery
Server) or a Print Scan operation using the ADF, set [ADF Thin Paper] to " On "
if the originals to be scanned are 52g/m
er.

4. Setting Originals

Original size
Maximum : A3, S, 11"×17" S
Minimum : A5" S
Maximum: 297 mm x 2000 mm
(when scanning in binary),
297 mm x 630 mm (when scan-
ning in colour or gray scale)
Minimum: 105 mm x 128 mm
Original weight

2
41-128g/m
2
52-105g/m
2
(45kg) or thinner, or A5 size or small-
2
or
109