Installing Software; List Of Files; Auto Run Program - Ricoh IS300e Operating Instructions Manual

Configuring the Scanner Settings

Installing Software

To use this machine as a network TWAIN scanner, it is necessary that the net-
work TWAIN driver is installed on the computer from which you use this ma-
chine.
To use the machine as a network delivery scanner, it is essential to install Scan-
Router V2 Lite on the delivery server. To check an in-tray or retrieve file, it is nec-
essary to install DeskTopBinder V2 Lite on the client computer.
3

List of Files

CD- Wizard for the TWAIN driver and utilities
ROM
Drive
DRIVERS
UTILITY
85

Auto Run Program

When the CD-ROM is inserted into a client computer in Windows
95/98/Me,Windows XP, Windows 2000, or Windows NT 4.0, the installer starts
automatically(Auto Run) to install the TWAIN driver and various software.
Note
❒ Auto Run might not automatically work with certain operating system set-
tings.In this case, launch "Setup.exe" located in the CD-ROM root directory.
❒ If you want to install the software without using Auto Run, hold down the
{ { { { Shift} } } } key while inserting the CD-ROM. Keep the { { { { Shift} } } } key held down until
the client computer has finished accessing the CD-ROM.
❒ If [Cancel] is pressed during installation, the installation will be stopped and
all the remaining software will not be installed. If [Cancel] has been pressed,
reinstall the remaining software after restarting the client computer.
Limitation
❒ For installation in Windows 2000, Windows XP, or Windows NT 4.0, log in as
a member of the administrators group.
102
TWAIN driver for Windows 95/98/Me, Windows XP, Win-
TWAIN
dows 2000, Windows NT 4.0
DESKLT Desk Top Binder V2 Lite
Scan Router V2 Lite
ROUTE
RV2
DEV- SmartDeviceMonitor for Admin, SmartDeviceMonitor for
MON Client