SMA SUNNY ISLAND 3.0M Operating Manual page 92

10 Troubleshooting
☑ The QCG configures slave 1.
9. To configure slave 2, wait until the inverter LED of slave 2 is flashing and the Sunny Remote Control shows the
message To identify slave2 press Tss on the Slv.
10. Press the start-stop button on slave 2.
☑ An acoustic signal sounds and the QCG configures slave 2.
11. Press the button on the Sunny Remote Control. This closes the QCG.
☑ The Sunny Remote Control switches from display mode to standard mode.
92 SI30M-44M-60H-80H-BE-en-33
SMA Solar Technology AG
Operating Manual