SMA SUNNY ISLAND 3.0M Operating Manual page 121

Sunny remote control
Hide thumbs Also See for SUNNY ISLAND 3.0M:
Table of Contents

Advertisement

SMA Solar Technology AG
No.
Name
162.08
PvEgyMtr
162.09
GdFeedEgyTdy
163# State
No.
Name
163.01
BatMntStt
163.02
SlfCsmpSOCArea Status of the battery utilization
163.03
SlfCsmpSOCLim
Operating Manual
Description
PV production meter reading in kWh
Today's grid feed-in in kWh
Description
Battery maintenance charge
status: If full charge or equal-
ization charge with PV energy
has not ended after 24 hours,
163.01 BatMntStt automati-
cally switches to On.
range
In systems for increased self-
consumption and in battery-
backup systems, this parameter
shows in which range the state
of charge of the battery is cur-
rently in (export mode).
Lower discharge limit for self-
consumption range as %:
With this updated display
value, the Sunny Island inverter
informs of the state of charge
up to which the battery for in-
creased self-consumption is dis-
charged (expert mode).
13 Parameters in Sunny Remote Control
Value
Explanation
On
Charge with solar
power: Full charge or
equalization charge ac-
tive; energy is drawn
from the utility grid
Wait
Charge with solar
power: If sufficient PV
energy is available, full
charge or equalization
charge active
Off
Inactive: No full
charge or equalization
charge active
SlfCsmpSOC
Range for increased
self-consumption
PVResSOC
Range for maintenance
of the battery state of
charge
BUResSOC
Range for the battery
backup system function
BatResSOC
Range for protection
against deep discharge
ProtResSOC
Range for protection in
the event of deep dis-
charge
5% to 90%
SI30M-44M-60H-80H-BE-en-33
✓ ✖
✓ ✖
✓ ✖
✓ ✖
✓ ✖
121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sunny island 6.0hSunny island 4.4mSunny island 8.0h

Table of Contents