SMA SUNNY ISLAND 3.0M Operating Manual page 27

SMA Solar Technology AG
Position Symbol Designation
D Internal transfer relay The generator is disconnected from the stand-alone grid.
E Direction of
energy flow
F Loads in the
Stand-alone grid
Status of the Sunny Island Inverter
Figure 8: Status of the Sunny Island inverter (example)
Position Symbol Designation
A Warning symbol
B Device assignment
C SD Memory Card
Symbol
flashing
None
Symbol
D Multifunction relay 1
Operating Manual
5 Operation of the Sunny Island Inverter with the Sunny Remote Control
Explanation
The stand-alone grid is synchronized with the generator. The genera-
tor is supplying the loads and charging the battery.
Loads are being supplied.
AC sources in the stand-alone grid are supplying more energy than is
being consumed by the stand-alone grid.
Symbol for loads in the stand-alone grid
--- -------
0.0kW
*
67%
Explanation
Symbol for warnings and errors that do not affect the Sunny Island
operation.
If this symbol is flashing, acknowledge the error or warning (see Sec-
tion 10.3, page 47).
The Sunny Island connected to the Sunny Remote Control is the mas-
ter.
The Sunny Island connected to the Sunny Remote Control is slave 1.
The Sunny Island connected to the Sunny Remote Control is slave 2.
SD memory card is inserted.
The Sunny Island is accessing the SD memory card.
SD memory card not inserted.
Multifunction relay 1 is deactivated.
Multifunction relay 1 is activated.
A
! M1
1.1kW
xx:xx:xx
SI30M-44M-60H-80H-BE-en-33
B
oo
C
D
E
F
27