Install The Safety Barrier; Install The Mesh And Grill - Vermont Castings SDDVTCBSB Installation & Operating Manual

Install the Safety Barrier

S
AFETY
NOTE: A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this appliance and
shall be installed for the protection of children and other
at risk individuals. If the barrier becomes damaged, the
barrier shall be replaced with the manufacturer's barrier
for this appliance.* Any safety screen, guard, or barrier
removed for servicing the appliance must be replaced
prior to operating the appliance.
* See parts list for model number�
The safety barrier has been designed to work with the
doors open or closed.
1. Remove screen from packaging.
2. Place the two bottom hooks over the bottom edge of the
stove opening Figure 56.
3. Press the screen against the stove snapping the two
spring fingers until the screen fits securely in place.
NOTE: It is the responsibility of the installer to ensure the
barrier is affixed to the stove at the time of installation.
DANGER
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
DANGER
Une barrière visant à réduire le risque de brûlure
par le hublot chaude est fournie avec cet
appareil et doit être installé.
30
CERTIFIED
B
ARRIER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud peut
causer des brûlures.
Laissez refroidir le panneau
vitré avant d'y toucher.
Ne laisser jamais les enfants
toucher le panneau vitré.
Vermont Castings • Stardance SDDVTSB Installation Manual_R10 • 04/18
Bottom Hooks
Figure 56 - Install safety barrier screen.
!
The safety screen barrier must be installed after the glass
front is in place. It is not a replacement for the glass and
the unit must not be operated without the glass in place.
Install the Mesh and Grille
Place the mesh and grille on the top of the Radiance stove
to complete assembly.
WARNING
3-90-20306760