Vermont Castings SDDVTCBSB Installation & Operating Manual page 15

Star Washer
Sheet Metal Screws
2
1
Phillips
Pan Head
Bolts
Star
Washer
NOTE: Shown without shell for clarification
Figure 17 - Attach blower assembly and snapstat.
ST314
Fk26ce
attach fan
1/24/00
Rheostat
Retaining Collar
Rheostat Knob
Figure 18 - Attach the fan rheostat.
• Remove retaining nut from shaft of rheostat. (if
preinstalled)
• Insert the rheostat through the hole in the back of the left
side of the valve bracket, aligning the locator pin with the
smaller hole in that bracket.
• Thread the retaining nut onto the shaft of the rheostat,
tightening with a wrench. Do not over tighten.
• Attach the control knob to the rheostat shaft.
• Use the wire tie to secure the fan and rheostat wire
harnesses together.
15
Snapstat
1/4" – 20
Hex Bolt
Snapstat
Bracket
3
Rheostat
ST347a
JUV
FK28
rheostat install
9/21/00
Vermont Castings • Stardance SDDVTSB Installation Manual_R10 • 04/18 3-90-20306760