Install The Safety Barrier; Install The Mesh And Grill - Vermont Castings Radiance RADVTSCCB Installation And Operating Instructions Manual

ASSEMBLY AND INSTALLATION

INSTALL THE SAFETY BARRIER

S
AFETY
NOTE: A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for the
protection of children and other at risk individ-
uals. If the barrier becomes damaged, the bar-
rier shall be replaced with the manufacturer's
barrier for this appliance.* Any safety screen,
guard, or barrier removed for servicing the
appliance must be replaced prior to operating
the appliance.
* See parts list for model number�
The safety barrier has been designed to work with the
doors open or closed.
1. Remove screen from packaging.
2. Place the two bottom hooks over the bottom
edge of the stove opening Figure 54
3. Press the screen against the stove snapping the
two spring fingers until the screen fits securely
in place.
NOTE: It is the responsibility of the installer to
ensure the barrier is affixed to the stove at the time
of installation.
DANGER
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
DANGER
3030
CERTIFIED
B
ARRIER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud peut
causer des brûlures.
Laissez refroidir le panneau
vitré avant d'y toucher.
Ne laisser jamais les enfants
Radiance
Bottom
Hooks
Fig. 54 Install safety barrier screen.
WARNING
The safety screen barrier must be installed after the
glass front is in place. It is not a replacement for the
glass and the unit must not be operated without the
glass in place.
INSTALL THE MESH AND GRILLE
Place the mesh and grille on the top of the Radiance stove
to complete assembly.
Direct Vent Gas Heater
®
20306759