Table of Contents
Advertisement
Intrepid® Direct Vent - Rear Vent Gas Heater
S
AFETY
Safety Barrier Installation Instructions
NOTE: A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
The safety barrier has been designed to work with the
doors open or closed.
1. Remove screen from packaging.
2. Align screen on stove front and adjust spring fin-
gers as needed. Press into place until spring fingers
engage. Figure 62
3. Press the screen against the stove snapping the two
spring fingers until the screen fits securely in place.
NOTICE: It is the responsibility of the installer to ensure
the barrier is affixed to the stove at the time of instal-
lation. The barrier is designed to be installed with the
doors open or closed.
Adjustable spring
fingers
Figure 62 -
Safety Barrier Installation
30
CERTIFIED
B
ARRIER
DANGER
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall
be installed for the protection of children and
other at risk individuals.
WARNING: The safety screen barrier
must be installed after the glass front is
in place. It is NOT a replacement for the
glass and the unit must NOT be oper-
ated without the glass in place.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
20306543
20306761
Advertisement
Table of Contents
