Executing From External (Through Usb Interface) - Siemens SINUMERIK 808D User Manual

10.10.1.1 Ex ecuting from external (through USB interface)
Pre requisite: A USB memory stick (which includes the part program to be executed) is inserted in the front USB interface of
the PPU.
Proceed as follows to execute a part program from external through the USB interface:
N o te
The USB directory is automatically identified if a USB stick is inserted.
Do not remove the USB stick during the external program execution through the USB interface.
66
1. Select the program management operating area.
2. Press this softkey to enter the USB directory, and select the program file you desire to exe-
cute.
3. To directly execute the program, press this softkey. The system automatically switches to
"AUTO" mode in the machining operating area. The program is transferred to the buffer
memory on the control system and then displayed in the following window:
You can also press this key on the PPU to view the program blocks first before executing.
Then press the following softkey to execute:
4. If desired, you can use this softkey to specify how you want the program to be executed.
For more information of the program control, refer to Section "Program control functions
(Page 53)" .
5. Press this key to execute the program. The program is reloaded continuously.
Either at the end of the program or after pressing this key, the program is automatically
removed from the control system.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017