A.2 Operating Mode Overview - Siemens SINUMERIK 808D User Manual

A.2 Operating mode overview
A.2.1 "JOG" mode
①
Opens the "T, S, M" window where you can activate tools, set spindle speed and direction (see Section "Activating the
tool and the spindle (Page 23)"), and select a G code or other M functions for activating the settable work offset.
② Switches the display to the relative coordinate system. You can set the reference point in this coordinate system. For
more information, see Section "Setting the relative coordinate system (REL) (Page 290)".
③ Opens the workpiece measurement window where you determine the work offset data. For more information about
this window, see Section "Measuring the workpiece (Page 57)".
④ Opens the tool measurement window where you determine the tool offset data. For more information about this win-
dow, see Sections "Measuring the tool manually (Page 27)", "Measuring the tool with a probe (auto) (Page 56)" and
"Calibrating the tool probe (Page 54)".
⑤ Opens the face cutting window where you specify parameters for machining the end face or peripheral surface of a
blank without creating a special part program. For more information about this window, see Section "Face milling
(Page 291)".
⑥
Opens the settings window where you can set JOG feedrate and variable increment values.
⑦ Displays the axis feedrate in the selected coordinate system.
⑧
Displays the axis position data in the relative coordinate system.
⑨ Displays the axis position data in the workpiece coordinate system.
⑩ Displays the axis position data in the machine coordinate system.
D i splay of variable increments
The HMI displays the variable increment if it is defined in the standard subroutine program:
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
Value ≤ five digits: displays the complete value
Value > five digits: displays the first four digits plus ".."
287