Siemens SINUMERIK 808D User Manual page 323

Now you can see the programmed contour in the graphics window:
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
20. Press this softkey to select a contour element of straight line in any direction.
21. Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
α1: -158 °
•
Y: -14.8 abs.
•
α2: 0 °
•
22. Press this softkey to confirm.
23. Press this softkey to select a contour element of straight horizontal line.
24. Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
L: 5
•
25. Press this softkey to confirm.
26. Press this softkey to select a contour element of straight vertical line.
27. Enter the parameters for this element and press this softkey to confirm.
Y: 5.7 abs.
•
28. Press this softkey to select a contour element of straight horizontal line.
29. Enter the parameters for this element and press this softkey to confirm.
X: 0 abs.
•
323