Setting User Data - Siemens SINUMERIK 808D User Manual

10.7

Setting user data

Fu n ctionality
The "User data" start screen lists the user data that exist within the control system. You can set or query these global
parameters in any program as required.
Op e rating sequence
10.8 Setting the date and time
By default, the system date and time remain the factory settings. You can proceed through the following operating sequence
to change the date and time as required.
Op e rating sequence
1.
+
2.
3.
4.
N o te
The settings of date and time are effective for 30 days if the control system is powered off for a long time at 25 °C
surrounding air temperature.
64
1. Select the offset operating area.
2. Open the list of user data.
3. Use the cursor keys to navigate in the list, and enter the values in the input fields to be mod-
ified.
N o te:
You can search for your desired user data with this softkey.
You can press this softkey to continue searching your desired user data.
4. Use this key or move the cursor to confirm your entries.
Select the system data operating area.
Open the date and time setting window through the following softkey operations:
→
Enter the date and time in the specified format.
Press this softkey to confirm your settings.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017