A.6 Editing Chinese Characters - Siemens SINUMERIK 808D User Manual

A.6 Editing Chinese characters
The program editor and PLC alarm text editor both allow you to edit the simplified Chinese characters on the Chinese variant
of the HMI.
Ed iting simplified Chinese characters
Press the following key combination to switch the editor on or off:
+
Press this key to toggle between different input methods.
Press the numeric keys (1 to 9) on the PPU to select the desired characters.
Example of editing simplified Chinese
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
6. Press either key to return to the main screen of the operation wizard.
7. Press one of the following five operating area keys to exit the main screen of the operation
wizard.
301