Preface - Siemens SINUMERIK 808D User Manual

Preface

Ap plicable products
This manual is valid for the following control systems:
C o ntrol system
SINUMERIK 808D ADVANCED M (Milling)
SINUMERIK 808D (Milling)
D o cumentation components and target audience
En d-user documentation
Programming and Operating Manual (Turning)
Programming and Operating Manual (Milling)
Programming and Operating Manual (ISO Turning/Milling) Programmers and operators of turning/milling machines
Programming and Operating Manual (Manual Machine
Plus (MM+), Turning)
Diagnostics Manual
Ma nufacturer/service documentation
Commissioning Manual
Function Manual
Parameter Manual
Service Manual
R e adme file
Third-party software - Licensing terms and copyright information
My D ocumentation Manager (MDM)
Under the following link you will find information to individually compile your documentation based on the Siemens content:
www.siemens.com/mdm
Sta ndard scope
This manual only describes the functionality of the standard version. Extensions or changes made by the machine tool
manufacturer are documented by the machine tool manufacturer.
Te chnical support
C o untry H o tline
Germany +49 911 895 7222
China +86 400 810 4288
You can find more hotline information at the worldwide Web site given above.
1)
2
Fu rther service contact information:
1)
Worldwide Web site:
•
https://support.industry.siemens.com/cs/ww/en/
Chinese Web site:
•
http://www.siemens.com.cn/808D
So ftware version
V4.8.1.2: PPU16x.3/PPU15x.3 with spindle/feed servo system
V4.8.1.1: PPU141.3 with feed servo system
Ta rget audience
Programmers and operators of turning machines
Programmers and operators of milling machines
Programmers and operators of turning machines
Mechanical and electrical designers, commissioning engi-
neers, machine operators, and service and maintenance per-
sonnel
Ta rget audience
Installation personnel, commissioning engineers, and service
and maintenance personnel
Mechanical and electrical designers, technical professionals
Mechanical and electrical designers, technical professionals
Mechanical and electrical designers, technical professionals,
commissioning engineers, and service and maintenance per-
sonnel
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017