Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
5.
Define a start point with the following parameters and press this softkey to confirm.
Programming plane: G17
•
X: 5.67 abs.
•
Y: 0
•
6.
Press this softkey to select a contour element of straight horizontal line.
7.
Enter the parameters for this element and press this softkey to confirm.
X: -93.285 abs.
•
8.
Press this softkey to select a contour element of straight line in any direction.
9.
Enter the parameters for this element and press this softkey to confirm.
X: -43.972 inc.
•
α1: -125 °
•
10.
Press this softkey to select a contour element of straight line in any direction.
11.
Enter the parameters for this element and press this softkey to confirm.
X: 43.972 inc.
•
α1: -55 °
•
12.
Press this softkey to select a contour element of straight horizontal line.
13.
Enter the parameters for this element and press this softkey to confirm.
X: 5.67 abs.
•
14.
Press this softkey to select a contour element of circular arc.
15.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
Direction of rotation: clockwise
•
R: 72
•
X: 5.67 abs.
•
Y: 0 abs.
•
16.
Press this softkey to confirm.
317