A.1.4 Program Management Operating Area - Siemens SINUMERIK 808D User Manual

So ftkey Fu n ction
⑥
Displays the defined user data
⑦ Measures the tool manually or automatically
⑧ Creates a new tool
⑨ Opens a lower-level menu for cutting edge settings
⑩
Removes the currently selected tool from the tool list
⑪
Searches for your desired tool with the tool number
A.1.4 Program management operating area
So ftkey functions
Pressing this key on the PPU allows you to open the following window:
①
Stores the NC programs for subsequent operations
②
Manages and transfers the manufacturer cycles
③
Reads in/out files via the USB drive and executes part programs from the external storage media
④ Reads in/out files via the Ethernet interface and executes part programs from a computer
⑤ Backs up manufacturer files
⑥
Backs up user files
⑦
Shows the recently accessed files
⑧ Executes the selected file. No editing is allowed in the execution process.
⑨ Creates new files or directories
⑩ Searches for files
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
Se e also
"Setting user data (Page 64)"
"Measuring the tool manually (Page 27)"
•
"Measuring the tool with a probe (auto) (Page 56)"
•
"Creating a tool (Page 21)"
"Creating/changing a cutting edge (Page 22)"
-
-
281