im Vertrieb von
Operation, cont'd
Control buttons and LEDs
f
N Video outputs in the computer/audio subgroup (
g
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Operation
3-4
CAMBOARD Electronics
Enter button and LED — The Enter button and LED have three primary
functions (•) and three secondary (❏) functions:
•
Save changes that you make on the front panel. To create a simple
confi guration:
Specify video, audio, or both (see I/O selection buttons and LEDs
j
k
[
] and [
])
Press the desired input button (
Press the desired output button(s) (
Press the Enter button.
computer video subgroup input (
Video outputs in the low resolution video subgroup (
low resolution video subgroup input (
When creating audio-only ties, the audio input in either video input subgroup
a
c
(
or
) can be tied to only outputs 1 through 6 in the computer video/audio
b
output subgroup (
).
When creating video and audio ties in the low resolution video group (from
d
to
), the switcher automatically breaks audio away (ties the audio input to a
different output than the video input) to an output in the computer video/audio
b
subgroup (
). This is because there are only audio outputs 1 through 6.
See Creating a confi guration, on page 3-8 to identify the outputs to which the
inputs are tied.
•
Indicate that a potential tie has been created but not saved.
•
Indicate that a global preset has been selected to be saved or recalled but
that the preset action has not been accomplished.
❏
With the Preset, View, and Esc buttons, select Serial Port Confi guration
mode. See Selecting the RS-232 Primary port's baud rate on page 3-37.
❏
Select 9600 baud for the RS-232 Primary port in Serial Port Confi guration
mode. See Selecting the RS-232 Primary port's baud rate on page 3-37.
❏
Indicate that the RS-232 Primary port is set to 9600 baud in Serial Port
Confi guration mode. See Selecting the RS-232 Primary port's baud rate on
page 3-37.
Preset button and LED — The Preset button and LED have two primary
functions (•) and three secondary (❏) functions:
•
Activates Save Preset mode to save a confi guration as a preset and Recall
Preset mode to activate a previously-defi ned preset.
•
Blinks when Save Preset mode is active and lights steadily when Recall
Preset mode is active.
❏
With the Enter, View, and Esc buttons, select Serial Port Confi guration
mode. See Selecting the RS-232 Primary port's baud rate on page 3-37.
❏
Select 19200 baud for the RS-232 Primary port in Serial Port Confi guration
mode. See Selecting the RS-232 Primary port's baud rate on page 3-37.
❏
Indicate that the RS-232 Primary port is set to 19200 baud in Serial Port
Confi guration mode. See Selecting the RS-232 Primary port's baud rate on
page 3-37.
Tel. 07131 911201
Fax 07131 911203
a
c
or
)
b
d
or
)
b
) can only be tied to a
a
).
d
) can only be tied to a
c
).
ce-info@camboard.de
c