Control Buttons - Extron electronics DTP CrossPoint 108 4K User Manual

Control Buttons

NOTE: See
Primary functions
Action
Indication
Secondary functions
Input audio Indication
configuration
Port Action 1:
configuration
Action 2:
Indication
Front panel Action 1:
locks
Action 2:
D
E
Front Panel Operations, beginning on page 29 for detailed descriptions of
the following operations.
Save changes Select Preset mode
Blink: Save needed Recall preset
ENTER
Select 9600 baud Select 19200 baud
Blink: 9600 baud Blink: 19200 baud
Select Lock mode 2 or toggle between mode 0 and mode 2.
Enter button (see figure 18
functions (❏) and two secondary functions (•):
❏ Saves coniguration or other changes that you make on the front panel. To create a
simple coniguration:
1. Specify video, audio, or both (see I/O buttons
2. Press the desired input button
3.
Press the desired output button or buttons
4. Press the Enter button.
❏ Indicates that a potential tie or other change has been created but not saved.
With the Preset, View, and Esc buttons , selects Serial Port Configuration mode.
•
Selects 9600 baud for the rear panel Remote port in Serial Port Configuration mode
•
and indicates the selection.
Preset button (see figure
three secondary functions (•):
❏ Activates Recall Preset mode to activate a previously-deined preset and indicates
the selection.
With the Enter, View, and Esc buttons, selects Serial Port Configuration mode.
•
Selects 19200 baud for the rear panel Remote port in Serial Port Configuration
•
mode and indicates the selection.
With the View and Esc buttons, selects front panel security Lock mode 2 or
•
toggles between mode 0 (unlocked) and mode 2.
DTP CrossPoint 4K Series Matrix Switchers • Operation
Select View mode
View mode selected
PRESET VIEW
Blink: Input Audio Configuration Mode.
Select Configuration mode.
Select 38400 baud Select 115200 baud
Blink: 38400 baud
Select Lock mode 1 or toggle between
on page 22)— The Enter button has two primary
(item A ).
(item
18)— The Preset button has one primary function (❏) and
Cancel or escape
Blinks once
ESC
Blink: 115200 baud
mode 2 and mode 1.
[item ] and [item ]).
H I
B ).
25