Output Adjustments Page - Extron electronics XTP II CrossPoint 1600 User Manual

Selecting audio breakaway
NOTES:
• Available for inputs on XTP CP 4i (XTP), XTP CP 4i HDMI, and
XTP CP 4i DVI Pro boards.
•
When
in the digital input.
• When
from the associated analog audio port.
• When
audio.
You can select the input audio for output as follows:
1. Click the
list appears.
2. Click the desired setting,
Changing the input gain and attenuation
You can set the level of gain or attenuation (-18 dB to +24 dB) of each
analog audio input from the Input Adjustments page. Adjust the audio
levels so there are no noticeable volume differences between sources.
Change the gain and attenuation setting for an analog audio input as
follows:
1. Click the
drop-down list appears.
2. Click and drag the slider or click on the scroll up
down
3. Click and the desired value.
NOTE: As an alternative to steps 2 and 3, or to listen to the audio
as you make adjustments, click on the up
button.

Output Adjustments Page

The Output Adjustments page (see
central location for changing how output video and audio are processed and muted. Access
the page by clicking the
Input Adjustments, EDID Configuration, XTP Power, or Presets page.
The page tailors the options available for selection when a XTP CP 4o SA (analog audio)
output board is installed.
available for selection.
NOTE: All options are available for selection for XTP CP 4o (XTP output) boards. If the
output from an endpoint connected to the XTP board is compatible with the option, the
adjustment is made. The Output Adjustments page indicates the change
regardless.
is selected, the switcher routes the audio embedded
HDMI
is selected, the switcher routes the analog audio
Analog
is selected, digital audio takes priority over analog
Auto
Audio Breakaway Select
,
Auto HDMI
drop-down list for the desired input. A
Input Audio Level
button until the desired value is visible.
figure 71
Output Adjustments
Allow Audio Only
XTP II CrossPoint 1600, 3200, and 6400 Switchers • HTML Operation
drop-down list for the desired input. A drop-down
, or .
Analog
button or the scroll
button or down
on the next page) is a
link on the left of the Set and View Ties,
and
Audio Breakaway Select
are not
137