Suzuki Madura GV700GL Service Manual page 250

• Remove the cotter pin.
• Loosen the axle clamp bolt.
• Loosen the axle nut by holding the axle.
• Take off the rear wheel.
DISASSEMBLY
• Flatten the lock washers.
• Remove fitting bolts and pull off driven joint.
Tightening torque
• Remove the 0-ring.
8-12 N·m
(0.8- 1.2 kg-m)
(6.0- 8.5 lb-ft)
• Take off the dampers by using the special tools.
09921 - 20210
Bearing remover
09930 - 301 02
Sliding shaft
CHASSIS 9-26