Secondary And Final Gear Oil - Suzuki Madura GV700GL Service Manual

Table of Contents

Advertisement

2·9 PERIODIC MAINTENANCE AND TUNE-UP PROCEDURES
SECONDARY AND FINAL GEAR OIL
Change:
1 000
km
(600
mi)
Inspect:
12 000, 24 000
km
(7 500, 15 000
mi)
To change the secondary and final gear oil, locate
the motorcycle on level ground, place it on the cen-
ter stand and carry out the following steps.
Use SAE #90 hypoid gear oil.
SECONDARY GEAR OIL
• Remove the secondary cover G).
• Drain oil by removing the filler cap ®and
drain plug
@.
• Refit the drain plug
@,
remove the oil level
screw @ and pour the specified oil in through
the filler hoie until it runs out from the oil
level hole.
• Refit the oil level screw@, filler cap ®and
secondary cover G).
NOTE:
The amount of oil to be replaced is
230-250
ml
(7.8-8.5 US
oz)
FINAL GEAR 01 L
• Drain oil by removing filler cap @and drain
plug@.
• Refit drain plug @ and pour the specified oil in
through the filler hole until it runs out from the
filler hole.
• Refit filler cap@.
NOTE:
The amount of oil to be replaced is
170 -
190
ml
(5.8-6.4 US
oz).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents