Suzuki Madura GV700GL Service Manual page 104

• Insert clutch drive plate and driven plate one by
one into sleeve hub in the prescribed order, cork
plate first. Insert clutch push piece, bearing
and thrust washer into pressure plate, making
sure that the thrust washer is between the
bearing and sleeve hub. Then fit pressure plate
into sleeve hub.
• Tighten clutch spring bolts in the order shown
in the photo.
NOTE:
Tighten the clutch spring set bolts in the
manner indicated, tightening them by degrees
until they attain a uniform tightness.
Clutch spring bolt
tightening torque
11 - 13 N·m
(1.1 - 1.3 kg-m)
(8.0- 9.5 lb-ft)
• Slide the gasket
CD
on the bolt and install the
front cam chain tensioner to the front chain
cavity.
991 04 - 32050
Tightening torque
Thread lock "1363C"
20-25 N·m
(2.0 - 2.5 kg-m)
(14.5-18.0 lb-ft)
• Install the rear chain tensioner to the rear chain
cavity in the same manner as front.
ENGINE SERVICING 3-74