Suzuki Madura GV700GL Service Manual page 242

OUTER TUBE METAL, OIL SEAL AND DUST
SEAL
Clean the metal groove of outer tube and new
metal outer surface.
Install the outer tube metal, oil seal retainer, oil seal
and dust seal.
CAUTION:
Use special care to prevent damage to the
Teflon coated surface of the Anti-friction
metal when mounting it.
09940- 50112
I
Front fork oil seal installer
FORK OIL
• For the fork oil, be sure to use a front fork oil
whose viscocity rating meets specifications
below.
Fork oi I type
Fork oil# 15
Fork oil capacity
479 ml (16.2 US
oz)
• Hold the front fork vertical and adjust the fork
oil level with the special tool.
NOTE:
When adjusting oil level, remove the fork
spring and compress the inner tube fully.
09943-74111
Fork oil level gauge
STD oil level
142 mm (5.6 in.)
FORK SPRING
• When reinstalling the fork spring large pitch end
should position in bottom.
CHASSIS 9-18
Oil seal
Retainer·.-¥?":r'iil!ll
Anti-fric-
~
I :
'
'
Bottom
I .
~.