Suzuki Madura GV700GL Service Manual page 139

• To remove the pilot bearing of final drive bevel
gear side, use the special tools,@ and®.
@
09930 - 301 02 Sliding shaft
®
09923- 74510 Bearing puller
CAUTION:
The removed bearing should be replaced with
a new one.
DRIVE BEVEL GEAR
• Remove the 0-ring and shims from the final
drive bevel gear housing.
• Removetheoil seal
G),
circlip @,propeller shaft
coupling @and spring @from the final drive
bevel gear coupling.
09900- 06108 Snap ring pliers
NOTE:
To remove the circlip @, it will be necessary
to push the propeller shaft coupling inwards
to remove spring pressure from the circlip.
CAUTION:
The removed oil seal should be replaced with /
0
a new one.
SHAFT DRIVE 4-24