Suzuki Madura GV700GL Service Manual page 122

4-7 SHAFT DRIVE
• Remove the oil seal by using the special tool,
then remove the bearing.
09913- 50121 Oil seal remover
CAUTION:
The removed oil seal should be replaced with
a new one.
• Remove the bearing races from the secondary
driven bevel gear housing by using the special
tools.
09941 - 54911
Bearing race remover
09913- 76010 Bearing installer
• Remove the secondary driven bevel gear pilot
bearing by using the special tools.
09923- 74510
Bearing puller
09930 - 301 02 Slide shaft
CAUTION:
. The removed bearing should be replaced with
a new one.
• Remove the oil seal by using the special tool.
09913- 50121 Oil seal remover
CAUTION:
The removed oil seal should be replaced with
a new one.